cij inks,continuous ink jet ink,small character inkjet ink,cij parts

HomeNEWS Videojet 43s inkjet printer parts
Videojet 43s inkjet printer parts

 

Videojet 43s and Willett 430 cij printer spare parts
Top Moulding, Keypad and LCD
1 through 5 378297-07 Kit, door and keypad, Russian 1
378297-10 Kit, door and keypad, Chinese
378297-101 Kit, door and keypad, UK/USA
378297-102 Kit, door and keypad, European
378297-103 Kit, door and keypad, Turk/Scandinavian
378297-105 Kit, door and keypad, Katakana
378297-107 Kit, door and keypad, Bulgarian
378297-108 Kit, door and keypad, East European
378297-11 Kit, door and keypad, Arabic
378297-115 Kit, door and keypad, Farsi
378297-12 Kit, door and keypad, Korean
378297-13 Kit, door and keypad, Thai
378297-19 Kit, door and keypad, Greek
378297-20 Kit, door and keypad, Hebrew
378297-23 Kit, door and keypad, Polish
Keypad bezel 
Keypad overlay 
Keypad circuit assy. 
Electronics compartment door 
100-043S-148 Gasket - top door 
378336 Backlight Inverter 
100-043S-175 Keypad harness 
100-043S-190 Display panel cover 
500-0085-140 LCD Panel 
100-043S-159 Keypad/LCD ribbon cable 
 Connector Panel
100-043S-160 Switch LED Cable 
100-043S-210 Switch Cable Assembly 
500-0097-128 Mains Power Filter 
100-043S-172 Mains Filter Ground Wire 
100-043S-170 Mains cable assembly (International) , 217019 Mains cable assembly (US)
100-043S-130 Shaft encoder cable (with port) 
100-043S-128 RS-232 cable (with port) 
500-0076-133 Blanking plug, 18mm 
500-0076-134 Blanking plug, 14mm 
100-043S-129 Photo Cell Cable 
500-0082-158 Switch 
 Electronics Compartment
200-0390-102 PSU 
200-043S-166 CPU board 
200-043S-145 Fan filter assembly 
200-0390-239 EHT module 
100-043S-158 EHT cable assembly 
200-043S-147 Thumb knob 
flash memory chips 
200-0430-160 I/O board 
200-0430-161 Ink pump motor driver board 
100-043S-137 Main Harness 
100-043S-164 Gland plate gasket 
100-043S-211 Fan assembly 
200-0390-119 Fan fail PCB 
200-043S-148 Fan grill assembly 
100-043S-176 Power harness 
 Printhead Assembly
100-0370-196 Front cover 
100-0370-231 Lid switch thumbscrew 
200-3900-135 Charge electrode/LED assembly 
200-0430-141 Nozzle assembly, 60 micron 
100-0430-155 Insert, lid switch 
200-0390-235 Cover switch assy.
200-0430-162 Head heater manifold 
521-0001-177 Pico valve 
500-0031-180 O-ring 25.81 x 3.53 CS 
100-0370-231 M2 5 x 6 cask head st. st. screw 
part of 200-043S-207 Umbilical 
100-0370-195 Rear cover 
200-3900-298 Phase detector assy. 
200-0430-131 EHT block assy. 
522-0080-226 22 meg EHT resistor (inside EHT block) 
100-0470-273 Ground plate, EHT (0 V) 
100-0430-115 Last chance filter 
500-0122-125 Compression spring 
200-043S-207 Printhead assembly (includes items 3, 5  through 9, 11, 13, 14 and 15)
 FMS platform
100-0370-102 VMS restrictor block   between V3 and FMS
204-0336-101 Venturi assembly 
200-043S-244 FMS assembly 
378269 Mixer tank sensor kit (43s only)   includes all 5 sensors
378277-03 Flush pump tube connector (red)  includes gripper
500-0031-234 6.07 x 1.78 O-ring 
500-0034-110 Non return valve 
500-0047-133 Pressure damper 
500-0041-296 Jaco nut 
200-0430-146 Flush pump assembly 
100-0430-114 Flush pump diaphragm 1 inside flush pump
378277-01 Flush pump tube connector (black)  includes gripper
378277-02 Flush pump tube connector (green)  on left side of flush pump,
includes gripper
500-0047-131 Pre-pump filter, 30 micron 
500-0047-134 inline filter, 8 micron  use this part for both prehead
filter and flush filter
500-0041-110 Festo tee 
500-0047-130 Main ink system filter, 5 micron 
100-0370-200 System manifold 
500-0031-175 4.47 x 1.78 O-ring 
378254 Pressure transducer (43s only)   includes both O-rings
500-0031-164 Pressure transducer front O-ring 
500-0031-201 Pressure transducer rear O-ring 
100-0370-112 Printhead manifold 
500-0031-117 1.78 x 1.78 O-ring 
521-0001-174 Solenoid Valve, 3-port (Valves V3 and V7)  white base
521-0001-175 Solenoid Valve, 3-port (V8)  black base
521-0001-173 Solenoid Valve, 2-port  (Valves V1, V2 and V6) 
V1 and V2 are shown on page 12-19.
500-0031-231 Valve O-rings (20 pack)
204-0346-101 75 micron VMS filter (10 pack) 1 tiny white filter in FMS
 
 Ink Bottles and Ink System Pump
200-0390-108 Pump 
100-0470-198 Pump seal gasket 
500-0031-249 O-ring (15.6/1.78) 
100-043S-180 Down tube 
500-0041-194 Jaco 1/8” tee 
500-0031-250 O-ring (20.4/1.78) 
100-043S-179 2x down tube adapter 
500-0031-251 O-ring (14.0/1.78) 
200-043S-250 Ink system kit 
200-0466-143 Level detect assembly 
100-0370-159 Level detect seal 
100-0466-144 Ink tank manifold 
100-043S-189 Solvent tank manifold 
100-0430-139 Manifold gasket 
100-0470-118 Solvent/ink tank 
NI 501-0002-101 1/8” tube, clear
NI 501-0002-114 1/8” tube, green stripe
NI 501-0002-113 1/8” tube, black stripe
NI 501-0002-115 1/8” tube, yellow stripe
NI 501-0002-131 6mm x 4mm PTFE tubing
 Ink filler caps
100-0470-191 Filler housing, ink 
500-0031-241 O-ring (53.64/2.62) 
100-0470-195 Cap retainer black 
100-043S-194 Ink cap 
500-0031-232 O-ring (45.69/2.62) 
100-0470-308 Cap retainer white 
100-043S-195 Top-up cap 
100-0470-192 Filler housing, top-up 
100-043S-188 Housing plate gasket 
100-043S-181 Housing plate 
100-043S-191 Housing nut